Electrode Material and Tools
| Item No. | Product | Description |
|
1
|
ruler | measure the side which will the electrode located and find the right electrode length. |
| 2 | Marker | mark the end of the electrode |
| 3 | film splitter | insert into the smart film and cut away part of PET-ITO layer to make electrode. |
| 4 | dust free colth | clean the PDLC on the electrode position |
| 5 | water-free alcohol | clean the PDLC on the electrode position |
| 6 | masking tape | fix the film, protect the cut edge from silver past and keep the working table clean. |
| 7 | silver paste | good conductive material |
| 8 | rubber strip | to make the silver past smooth and even |
| 9 | air blower | dry the silver paste faster. |
| 10 | narrow copper strip | stick onto the non adhesive side of the smart film. |
| 11 | wide copper strip | stick onto the adhesive side of the smart film and folded to the opposite side. |
| 12 | scissories | cut the copper strip and make the copper flat. |
| 13,14 | wires | shall be soldered onto the copper strip. |
| 15,16 | solder and iron | used to fix wires onto the copper strip. |